HUMIDITY SEPARATORS
S10H
When wet steam is used in sterilization, moisture in suspension reduces the heat transfer efficiency, and the validity of the sterilization process can be compromised. S10H series baffle separators remove moisture from steam pipelines. Steam passes through the separator and as a result of expansion, impact and swirling effects, the particles with a heavier specific gravity are separated, such as water droplets and moisture in suspension. The condensate collected at the bottom of the separator must be automatically drained by a suitable steam trap.
MATERIAL
Stainless steel
SIZES
1/2” to 3”
CONNECTIONS
ASME BPE clamp ferrules
MAX. ALLOWABLE PRESSURE
10 bar
MAX. OPERATING TEMPERATURE
200 ºC
S10HV
When wet steam is used in sterilization, moisture in suspension reduces the heat transfer efficiency, and the validity of the sterilization process can be compromised. S10HV series centrifugal separators remove moisture from steam pipelines. Steam passes through the separator and as a result of centrifugal forces, impact and swirling effects, the particles with a heavier specific gravity are separated, such as water droplets and moisture in suspension. The condensate collected at the bottom of the separator must be automatically drained by a suitable steam trap.
MATERIAL
Stainless steel
SIZES
1/2” to 2”
CONNECTIONS
ASME BPE clamp ferrules
MAX. ALLOWABLE PRESSURE
10 bar
MAX. OPERATING TEMPERATURE
200 ºC
S11
When wet steam is used in sterilization, moisture in suspension reduces the heat transfer efficiency, and the validity of the sterilization process can be compromised. S11 series centrifugal separators remove moisture from steam pipelines. Steam passes through the separator and, as a result of centrifugal forces, impact and swirling effects, the particles with a heavier specific gravity are separated, such as water droplets and moisture in suspension. The condensate collected at the bottom of the separator must be automatically drained by a suitable steam trap.
MATERIAL
Stainless steel
SIZES
1/2” to 2”
CONNECTIONS
ASME BPE clamp ferrules
MAX. ALLOWABLE PRESSURE
10 bar
MAX. OPERATING TEMPERATURE
200 ºC